Subway Evacuation Nails and lamps & luminous anti-skip strips
customized shape and Customized solution for subway evacuations,
standard 304 or 316 grade stainless steel Subway Evacuation Nails and Floor lamp
(1) Adopt 3mm national standard 304 × grade stainless steel plate, stainless steel metallurgy high temperature and high pressure one-time forming. The surface image and text are stamped and sunk, and the shade is coated with light storing materials.
(2) The light storage material shall be long afterglow material, which can still self illuminate when its surface illumination disappears or decreases. The self luminous storage shall meet the following requirements:
Performance: light yellow or green powder.
Luminous color: light yellow or green.
Main peak wavelength: 520nm.
The wavelength range of excitation light: 200-450nm, and its self illumination and light storage shall meet the following requirements:
5 min brightness ≥ 600mcd / ㎡
60 min brightness ≥ 15mcd / ㎡
(3) The surface of the mark shall not be lower than grade 0 according to the requirements of GB / t1766-1995.
(5) The weatherability, color material adhesion, corrosion resistance, impact resistance, water resistance and radioactivity of the light storage fire evacuation signs shall meet the requirements of ga480.3-2004
Installation instructions:
(1) The self luminous evacuation sign is pasted and fixed with environmental protection structural adhesive, and its performance requirements meet the general standards.
(2) Slotted on the ground stone, embedded and pasted with structural glue, and the surface of the sign shall be kept flush with the ground. The step surface is directly pasted with structural adhesive. See the drawings for specific construction requirements. In special cases, communicate with the designer and deal with it according to the specific situation
